If you are struggling to choose between the Dewalt 744 vs 745 table saw. This article will shed light on the differences and similarities between the two. They have similar safety features, use the same sized blades and allow adjustments. However, the difference lies in speed, depth of cuts, and angles. The information I gathered and the experience I had with these models helps you take the model that matches your needs. That is what this article is explaining.
Overview of the Dewalt 744
The Dewalt 744 is a table saw that uses a standard 10inch saw blade. You are allowed to use saw blades of smaller sizes. The 10inch blade cuts through crosscuts and straight cuts. I advise blades with a maximum cutting capacity of 5,000 rotations per minute. Avoid kickbacks by keeping the saw blade to the rip fence. If it is not parallel, you adjust the rail fence. A 6inch wide push stick is used for feeding your material.
The blade guard has to be in place when operating the Dewalt 744. It has a table-sized 191/4 inch x 261/2 inch. The miter angle is 30 degrees to the left and right sides. The bevel angle ranges from 0 to 45 degrees. It comes with a 10inch blade. The maximum cutting depth at 0 degrees is 3 1/8inch and 2 1/4inch at 45 degrees. The no-load speed is 3,650 rotations per minute. You have to adjust the rip scale before using the saw machine.
The rip fence is on either the left or right side. The blade is easy to replace. Make sure the saw is unplugged when changing the saw blade. The On/Off switch has a paddle that you use to operate the power switch. There is a hole inside the power switch that you insert the padlock to lock. That restricts the usage of the machine on unauthorized users.
- Blades are easy to replace
- Smooth start-ups
- The motor runs slow
- The motor smokes.
Key Features of the Dewalt 744
The Dewalt 744 comes with a 10inch blade that is easy to replace. When replacing the saw blade, raise the saw blade to its maximum height by turning the blade height adjustment in a clockwise motion. You need to take out the arbor nut and turn it counterclockwise. Place the saw blade on the spindle. The teeth have to point down and tighten the arbor nut. Different types of blades give you cuts in different widths.
The rip fence is on either side of the saw. You secure the rip fence by attaching the latches onto the rails. You have to push it down. The blade has to stay parallel to the saw fence. When adjusting the saw fence, you unlock the rail lock lever, loosen the hex bolts and adjust the saw fence. Lock the rail lever back and tighten the bolts.
Dust collection system
The Dewalt 744 comes with a dust shroud and dust collection port. You are also allowed to connect a vacuum for efficient dust collection. It does not allow clogging inside the saw machine. When you want to clean the dust extraction system, unplug the saw, turn it on the side and open it. Clean excess dust and put it back to the saw.
The blade guard protects your fingers from the sharp blade. The blade and the splitter have to align by removing the blade guard and adjusting shims. The blade guard allows the anti-kickback teeth to start functioning.
The miter gauge comes with adjustable stops at 90 and 45 degrees on both sides. Loosening the lock nuts allows you to adjust the miter gauge. You also adjust by loosening the adjusting screws against the stop plate.
Overview of the Dewalt 745
Dewalt dw745 is a table saw that looks portable and compact. Being a compact-sized machine does not mean it is less powerful. It has a powerful monitor that can withstand the pressure of cutting down large sheets of material into small pieces. Working with a table saw is dangerous, but the Dewalt 745 has safety features that ensure the user that accidental injuries are rare. It has a metal roll cage that makes it a durable machine.
A plastic base that comes with standard table saws would have given it a cheap look. The table coating feature prevents friction and makes the cutting process smooth. The fence rails make it smaller and portable. You can carry it around just in case you are working from home. It is quick and more accurate when it comes to tasks. You do not have to worry about the amount of dust created during the process.
The 2-1/2inch vacuum makes the cleaning process bearable. The 24T carbide blade increases life and quality. Adjustability is made possible by the rear feet if you are working on uneven surfaces. The machine is very light as it weighs 45lbs. The 20inch of rip makes the tasks easier by cutting multiple shelving and trim materials. The package includes a Miter gauge, 24T Carbide blade, push stick, and blade guard.
- Accurate and adjustable
- Compact and lightweight
- Durable construction
- High rip capacity
- Smooth cutting surface
- Noise from the motor
- It does not work with a dado stack.
Key features of the Dewalt dw745
The Dewalt dw745 comes with a 10inch blade for tough wood. You take care of that by substituting with one with more teeth. However, that does not mean that the machine can now only work with hardwood. The new blade can make depth cuts of 2.25inches through the 45-degree tilt of the blade. It can tilt up to 90 degrees. The fence system can offer up to 610mm of rip capacity.
The 10inch carbide blade has 24 teeth. It is highly durable. When it erodes, you can safely replace it. If your budget allows, I encourage you to buy the original one. Changing the blade might not need tools. The sharpness cuts through multiple types of hardwood. It gives smooth cuts that are also accurate.
Max cutting depth
The maximum cutting depth of the Dewalt dw745 is 3-1/8 inches at 90 degrees. When working at 45 degrees, the cutting depth is 2-1/4 inches.
It is an 1850 Watt motor that matches the sturdy construction. The motor has a power capacity of 15amp for materials. Amongst the materials is hardwood or pressure-treated lumber. The speed is 3850 rotations per minute. It yields quicker and clean cuts in projects.
Rotations per minute
The powerful motor has the capacity of making 3850 Rotations per minute. That is quick for different types of wood.
Pinion fence rails
The rack and pinion fence rails are adjustable, making the work bearable. The operation becomes fast, accurate, and smooth. The rails can get smaller. It complements the machine as the rails give you a compact-sized package.
The push stick ensures that your hand is safe from the blade. It is easy to remove and replace.
The blade angle has a turning will at the front. It ranges from 0 to 45 degrees. Accurate angle adjustments are determined by the miter gauge.
- They both come with safety features.
- They use 10inch blades.
- They are lightweight.
- They are adjustable.
- The Dewalt 744 is lighter than the 745.
- The Dewalt 745 produces 3,850 rotations per minute, whereas the 744 makes 3,650 rotations per minute.
- The maximum cutting depth of the Dewalt dw745 is 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, whereas the 744 has 31/8inch at 0 degrees and 21/4inch at 45 degrees.
- Angles of the 744 saw bevels from 0 up to 45 degrees, whereas the 745 tilts from 45 to 90 degrees.
The Dewalt dw745 is below 900, whereas the 744 is below 300. That makes the 744 more affordable than the 745.
The two models have more similarities than differences. A closer look at the table saws will lead you to your top pick. If you have a tight budget, I recommend the 744. It is more comfortable than the competitor. However, the Dewalt 745 is faster than the 744. The 744 remains the lighter model if you are worried about weight. Choosing the table saw within your budget, space, and cut is the best.