Choosing between a Dewalt dwe7485 vs dw745 is very difficult since they have multiple similarities. There is a slight difference in weight between the two that can go unnoticed. They both work on the same material and come with different depth capacities. However, there are numerous features to consider that will point you to your ideal machine. These include dust collection, RIP, RPM, table size, and many more below.

Overview of the Dewalt dwe7485 Table Saw

It is an improved version of the dw745 with a high power capacity of a 1700W motor. This powerful motor allows the machine to cut through multiple timber furniture with ease. It does not matter the size of the material you are working on. 

The blade has the capacity of making up to 5800 rotations per minute. It ensures that you get a finish that is not time-consuming to execute. The dw745 is compact sized, whereas the Dewalt dwe7485 is more compact. It can connect to the dust extractor. It is ideal for the most challenging tasks. It supports tasks such as cutting flooring to the desired size and cutting timber poles to the appropriate size that fits your transportation. It has an Airlock dust port that allows you to connect to the vacuum. 

At an angle of 90degrees, it has a depth capacity of 65mm. On a 45degree angle, it can go as deep as 45mm. The Bed of cast aluminum makes it rigid and more accurate. The package includes a full-length fence, miter fence, push stick, spanners for blade change, and a 210mm blade. Your safety is enhanced as the machine comes with the NoVolt  Release switch. The machine is easy to carry around and does not take up much space in your garage. The Airlock feature allows you to connect to a vacuum that deals away with dust. It helps you keep the machine clean. Less effort is needed to keep it clean. 

Pros

  • Larger rip capacity
  • Smaller table size
  • Extremely compact
  • Increased accuracy
  • Safe
  • Durable
  • Powerful
  • Anti-load protection system
  • Two dust-collection ports

Cons

  • No stand
  • The miter gauge is not stable when using the machine.

  (Source)

Key features of the Dewalt dwe7485 Table Saw

Safety features

What makes the machine extra-safe is the NoVolt Release switch. It is a type of circuit breaker that stops the machine from working as soon as it detects that you have a power supply failure. It can also be known as an emergency stop switch. 

RPM Speed

The machine has the capacity of rotating 5800 times per minute. It is fast enough to use on the high volume of timer. No matter how deep the material is, it will not slow down. 

Blade guard

It has an 8-1/4 inches blade. The blade guard prevents your wood from falling from the spinning blade and your hand from the blade. It is easy to replace. However, the way you position your hand is important since that can cause cuts from the blade. 

Dust collection port

The dust collection port decreases the chances of inhaling dust. It also helps the machine to stay clean and keeps the maximum performance. It has the Airlock dust port that allows you to connect your table saw to a vacuum. A vacuum is efficient when it comes to cleaning dust from your machine. It improves safety in terms of health and the cleaning system. 

Rack & pinion

More accuracy comes with the dual rack and pinion fence system. It ensures that there is no up-right movement that takes place. 

Accurate cutting

Several features make the machine accurate. These include the blade, the powerful motor, and the large rip capacity. 

Powerful motor

The motor has a power capacity of 1700Watts. It has more power that allows the machine to go deeper when cutting. It complements the size of the blade for deep timber.

Blade size

The blade makes up to 5800 rotations per minute. It uses a 210mm blade that goes through any texture of timber with ease. A fine finish is made possible with the type of blade given. Accuracy is ensured, and it cuts down the time you spend cutting material. It is great for high volumes. 

Overview of the Dewalt DW745

Dewalt dw745 is a table saw that looks portable and compact. Being a compact-sized machine does not mean it is less powerful. It has a powerful monitor that can withstand the pressure of cutting down large sheets of material into small pieces. Working with a table saw is dangerous, but the Dewalt dw745 has safety features that ensure the user that accidental injuries are rare. It has a metal roll cage that makes it a durable machine. 

A plastic base that comes with standard table saws would have given it a cheap look. The table coating feature prevents friction and makes the cutting process smooth. The fence rails make it smaller and portable. You can carry it around just in case you are working from home. It is quick and more accurate when it comes to tasks. You do not have to worry about the amount of dust created during the process. 

The 2-1/2inch vacuum makes the cleaning process bearable. The 24T carbide blade increases the life and quality of the blade. Adjustability is made possible by the rear feet if you are working on uneven surfaces. The machine is very light as it weighs 45lbs. The 20inch of rip makes the tasks easier by cutting multiple shelving and trim materials. The package includes a Miter gauge, 24T Carbide blade, push stick, and blade guard. 

Pros

  • Accurate
  • Adjustable
  • Fast
  • Handles large material
  • Compact and lightweight
  • Durable construction
  • A sturdy metal roll cage base
  • High rip capacity
  • Smooth cutting surface

Cons

  • Noise from the motor
  • It does not work with a dado stack.

(Source)

Key features of the Dewalt DW745

Rip Capacity

What determines the cutting capacity is the type of blade and the number of teeth. The Dewalt dw745 comes with a 10inch blade that has 24 teeth. It is ideal for tough wood. You can take care of that by substituting the blade with one with more teeth. However, that does not mean that the machine can now only work with tough materials. The new blade can make depth cuts of 2.25inches through the 45-degree tilt of the blade. It can tilt up to 90 degrees. The fence system can offer up to 610mm of rip capacity. 

10-inch blade

The 10inch carbide blade has a saw. It is highly durable. However, it does not mean that it cannot be damaged. It will take time. When it erodes, you can safely replace it. If your budget allows, I encourage you to buy the original one. Changing the blade might not need tools. It has 24 teeth. The sharpness cuts through multiple types of hardwood. The blade makes smooth cuts that are also accurate. It can handle most of the tasks. 

Max cutting depth

The maximum cutting depth of the Dewalt dw745 is 3-1/8 inches at 90 degrees. When working at 45 degrees, the cutting depth is 2-1/4 inches. 

Amp motor

It has an 1850 Watt motor that is highly powerful. The motor produces power that matches up with the sturdy construction. The power can make difficult tasks easy. The motor has a power capacity of 15amp  for tough material. Amongst the materials is hardwood or pressure-treated lumber. The powerful motor can be as strong as 3850 Revolutions per minute. It yields quicker and clean cuts in tough projects. 

Rotations per minute

The powerful motor has the capacity of making 3850 Rotations per minute. This is quick for different types of wood. 

Pinion fence rails

The rack and pinion fence rails are adjustable. The adjustments make the work bearable. The operation becomes fast, accurate, and smooth. The rails can get smaller. It complements the machine as the rails give you a compact-sized package.

Push stick

The push stick ensures that your hand is safe from the blade. It is easy to remove and replace. 

Blade angle

The blade angle comes as a turning will that is located at the front. The angles range from 0 to 45 degrees. The miter gauge determines accurate angle adjustments.

Similarities

  • Both table saws use carbide blades of the same type with the same number of teeth.
  • They connect to a vacuum that quickly takes away dust.
  • They have a 12-inch rip capacity onto the left side of the blade.

Differences


Differences

Dewalt dwe7485

Dw745
Carbide blades81/4 inch disc10inch blade
Jobsite table saw241/2 inches20inches
Table sizeSmallerBigger
Fence adjustmentsFull-length fenceParallel fence
Dust portOne suction portTwo different ports
PackageTwo blade change wrenchesNon-through cut riving knife
Blade210mm254mm
Power buttonNo Volt Release switchOn/Off switch
Accuracy of cuttingCast tableCast table
AMPs15amp15-amp motor
Maximum Rip CapacityLarger rip capacitySmaller rip capacity
SafetyAirlock compatibleTransparent safety guard
Weight45pounds53.4pounds
RPM58003850

Cost

The Dewalt dw745 is an affordable machine. You can get it for under 300. You need to compare prices if you are running on a tight budget. You might save a few bucks even if it is affordable. The price range does not compromise the quality. The Dewalt dwe7485 comes at a steeper price than the dw745.

Verdict

The Dw745 is the best-selling table saw in the market for a long time. The Dewalt dwe7485 is an improved version of the dw745 that might be the reason for its steep price range. The power tools use carbide blades of the same type with the same number of teeth, can be connected to a vacuum that quickly takes away dust, and has a 12-inch rip capacity onto the left side of the blade.

However, I would buy the Dewalt dwe7485 with a No Volt power system that ensures that I am a safe, powerful motor that allows it to go deeper than the dw745 and maximum rip capacity. If you are running with a slim budget, the dw745 would be ideal. 

David D. Hughes