Choosing between the Wen 6559 vs 6560T is tricky since the two are from the same manufacturer. They are bound to be similar although differences set the benchtop jointers apart. You need to compare the type of bench. You need to be aware of its size and the type of workshop you need it for. The cutter heads are included as well. They vary in sizes and shapes hence you have to choose the one perfect for you. The cut depth, power, cost, noise output and benefits that come with each product are worth comparing. By the end of the evaluation below, you would have known your top pick.
Overview of the Wen 6559
The Wen 6559 is a 6 inch benchtop jointer. It comes with a two-blade 6 to 1/8 inch cutter head. The 10 amp motor produces up to 20,000 cuts per minute on a 1/8inch material. The depth scale makes the jointer easy to adjust depth. The fence is also adjustable as it bevels up to 45 degrees in both directions.
The package includes a push stick, push block, dust filter, an adjustable dust chute, and a filter bag. The jointer maximizes precision in the 10 amp motor. The dual-blade makes cutting easy on the hardwood. The adjustable table allows you to cut from 0 to 1/8 inches. The jointer comes with a scale that easily adjusts and maximum accuracy.
The table is more spacious, and you have more space for materials. The blade guard is safe to use. The jointer operates from a workbench. It does not come with a stand. That means moving is not easy. It weighs up to 36.4 pounds. The base is aluminum which is durable and sturdy.
- Ease of use
- Great value
- Maximum precision
- Adjustable table and depth scale
- Powerful motor
- The adjustment system on the fence could have been better
- The jointer bearing seize up after an hour of use
Key Features of the Wen 6559
The blade is 6inches in diameter. They are not difficult to adjust, but they need proper adjustment. The two blades are heavy, but they remain stable.
The powerful 10Amp motor comes with a two-blade 6-1/8inch cutter head that produces up to 20,000 cuts per minute. That is a big number for a jointer. The cutting process is made easy, even on the hardwood. The chances are low that you will have materials you cannot cut through.
The table is adjustable so that it accommodates cuts that are 1/8 inches deep. The table features an onboard scale that makes adjustments easy. That breeds maximum accuracy on the cuts.
The fence system has a fence that bevels up to 45 degrees. That is ideal for angled cuts that cut along your board. However, the adjustments on the rip fence could have been better. There is only one screw that makes adjustments difficult. It is hard to operate the rip fence at 90 degrees. A heavy iron fence would have been ideal. When you want to tighten down the rip fence, you spin the carriage bolt in a ¾ turn. The knob is convenient to use since it is fast.
The blade guard has loads of springs that prevent you from having accidental injuries. It only exposes the cutter head when you are operating the jointing.
Dust collection system
The dust extraction process is impressive. It features an onboard dust port and a filter bag. The filter bag helps you with minimal cleaning. It keeps your environment clean.
Overview of the Wen 6560T
The Wen 6560T comes with 6 inch blades. A 10 Amp corded benchtop jointer comes with a filter bag and a depth scale. You have to operate the jointer from a workbench since it does not come with a stand. The 10 amp motor maximizes precision using a two-blade 6 to 1/8 inch cutter head.
It has the capacity of making up to 20,000 cuts per minute. That is ideal for easy cuts even on the hardwood. The table is adjustable and cuts between 0 to 1/8 inches deep. It is spacious as it gives more space to long and wide materials. The depth scale is also adjustable for maximum accuracy. The jointer is made of cast iron and that is why it is durable.
The cast iron base allows the jointer machine to withstand vibration. It is ideal for both hobbyists and homeowners. The jointer weighs 80 pounds. It is measured 28.5 x 20 x 14 inches. The manual included inside the package is quite informative. It gives you guidance on installation, usage and maintenance.
- The blades remain sharp for a long period
- Easy to maintain
- Detailed manual
- Spacious table
- The fence system could have been better
- Beginners struggle to assemble
Key features of the 6560T
The safety features that come with the jointer are: push stick and a push block. The manual also guides you on proper installation and usage to avoid hurting yourself. The dust port connects to the dust bag. You have a safe and clean work environment.
The blades are very sharp, and you need a guard to protect your fingers from the machine. The blade does not wear or tear in a shop space of time. They last longer, and you replace them as soon as you notice low performance.
The cut capacity is 6 inches deep. You are allowed to handle multiple tasks, working on the hardwood. That is neither small nor large. It allows you to control and withstand the pressure that comes with the cuts on different materials.
The Wen6560t comes with a 1-1/2 horsepower that gives you smooth cuts. The 10Amp motor allows you to produce up to 20,000 cuts per minute. As much as the more is so powerful that it vibrates, the cast iron base makes the tool sturdy and solid. It remains well-balanced.
The table is quite spacious and you will not have problems when working on large and wide materials. It is measured 61/4 x 28-1/2 inches.
The 6inch blade is sharp to cut through hardwood. The jointer comes with a cutter head with two blades. That makes the process accurate, smooth and fast. The cutting depth is adjustable.
- They both come with 6inch blades.
- Both products are low-budget users.
- They are classified as workbench jointers.
- They both come with 10 Amp motors.
- They produce up to 20,000 cuts per minute.
- They both come with spacious tables.
- They have depth scales and cast iron bases.
- They both weigh 36.4 pounds.
- The Wen6560T is ideal for professionals, whereas the Wen6559 is meant for both beginners and professionals.
- The Wen6559 has a maximum of 10,000 cuts per minute whereas the 6560T makes up to 20,000 cuts per minute.
Both products are under 300,, and they are affordable products considering what they offer and the prices. The Wen6559 is more affordable than the 6560T. However, they have a difference of 30.
The Wen6560T is quite affordable and ideal for professional users. It is a bit challenging on installation, but as soon as you figure out how it works, it will be easy. The blade remains sharp for a longer period and the cast iron base remains durable and solid. The Wen6559 is more affordable than the 6560T, although they are low-budget jointers. It is more versatile. However, it lags on speed. I am sure you already have your top pick between the two.