February 23, 2020

Dewalt Table Saw Stand Review

Are you looking for the best Dewalt table saw stand on the market? Table saws are almost a staple in some woodwork shops. You will most assuredly find one in many workshops. This is because they make cutting through wood, professionally, so much easier. It gets cumbersome trying to make straight accurate cuts when you do not have the right tools. 

Are you looking for the best Dewat table saw stand on the market? Table saws are almost a staple in some woodwork shops. You will most assuredly find one in many workshops. This is because they make cutting through wood, professionally, so much easier. It gets cumbersome trying to make straight accurate cuts when you do not have the right tools. 

A traditional table saw has many different components that work together to make it the beautiful asset that it is. The blade is one of these many different components and it is important to make sure you are always protected when working it. Table saws can be fitted with different blades and they can also make different cuts through wood. You now need to know what type of cut you need and what will help you make it.

ImageName & Key FeaturesLink
DEWALT Table Saw Stand, Mobile/Rolling (DWE74911)CHECK CURRENT PRICE
DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS)CHECK CURRENT PRICE

The table saw you buy may or may not come with a stand. Portable saws do not come with stands and this is what makes them portable. You can move them around from one work station to the next because of this. Benchtop table saws also known as job site table saws, have to be placed on a stand. 

Some people prefer to make their stands, however, manufacturers have not slacked on this. You can go out and buy a table saw stand and make your life much easier. In this article, we take a look at the best stands on the market and what you need to be looking out for. 

Do you need a quick guide to buy the best stands on the market? Buying the saw is all well and good because that is the tool that you will be using. However, you will need t make sure that it is secure as you work and also that it fastens properly, allowing you to feed material into the saw without worrying about much. Ensure that your stand is portable and compatible with your saw. 

Our Top Pick for  

Our Winner!

We have dug deep, done our research and found the best saw stands on the market. Our favorite is easily the DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS). It is lightweight in design and has foldable legs which make it easy to carry and also to store. It is heavy-duty enough to balance upright and provide both mobility and stability. It also comes with brackets to connect it to the saw easily and securely.  The wide stand base and offset rear legs give stability and support for material feed control.

DEWALT DW7451 Compact Table Saw Stand

Check The Current Price

We all appreciate the idea of being able to adjust our table saws without using tools. It just makes life a little bit easier. In most cases, this also means that you will not need much experience either when making these adjustments.

This is a versatile table saw that is designed to be placed on a job site. It is popular among contractors. That is mainly due to the ease with which you can transport it from one area to another. With a weight of just 45lbs you can see why this is the case. It also does not require much work when it comes to setting it up to work.

From a functional standpoint, it delivers quick cuts that are quite accurate. Do not let the size catch you off guard either. This is a very powerful machine. It has a 15 Amp high-torque motor that is capable of 3859 rpm. It is capable of taking on hardwood and other challenging jobs that you may throw at it. 

The blade on this saw is 10-inches. Once configured, the fence enables you to get a rip capacity of up to 20-inches. By using the rack and pinion fence rails, there is ease when it comes to making adjustments. You can carry these out quite quickly. The fence is designed in a telescopic manner. There is a coating layer on the surface of the table. This ensures that friction is kept to an absolute minimum.

The final feature we should mention ins the dust collection port. You can pair this with a shop-vac to create an incredibly efficient dust extraction system. A clean workspace tends to be a safer and more productive one.


  • It is very strong and stable.
  • It is simple to set up.
  • Suitable for the average height person
  • It is lightweight.
  • It is fairly easy to assemble.


  • The height cannot be adjusted.
  • The instructions could be better worded.

DEWALT Table Saw Stand, Mobile/Rolling (DWE74911)

Check Price On Amazon

If you are going to be moving from one working area to another, a rolling stand is a must-have. The DWE74911 comes with heavy-duty wheels that are designed for job sites. They are capable of taking steps, kerbs and other debris that one will encounter on a job site. 

You will also be pleased to find that the legs can be folded. When not in use, you would probably want to have them disengaged, which is what this feature allows you to do. They have a quick-release lever to get them up and down when needed. 

To ensure that the stand would not be an additional burden, they have kept its weight to a minimum. This not only makes it portable but also ensures that it is an aid to moving your table saw without being a pain to move itself. There is a heavy-duty kickstand on this device as well. 

This is designed to place the table saw in an upright position so it can stand on its own. It adds to the mobility and storage functions. The design of the stands leaves plenty of standing room for the user. There is a universal bracket that makes it easy to attach this device to most table saws. There are minimum time and effort required for setting it up and breaking it down. It is also quite easy to mount your table saw onto it.


  • It is easy to set up.
  • The wheels make it easy to move around.
  • It is a sturdy stand.
  • The height seems perfect for most users.
  • It is reasonably lightweight.


  • The assembly instructions are not quite foolproof.

DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS)

Check Price on Amazon

Still, on the theme of lightweight designs, we ought to introduce you to the DW7440RS stand. It weighs just 33lbs. According to the manufacturer, this is about the fifth reduction in weight in comparison to its competitors. This is a heavy-duty stand. 

It comes with a kickstand that is designed to allow you to have your hands free while the stand and whatever it is carrying remain balanced. That is a key feature in delivering a stand that gives you mobility and some storage. 

There are quick connect stand brackets underneath it. They allow you to have your table saw mounted in no time at all. By the same token, it is just as easy to dismount your saw once you are done working. It may not seem like much time is being saved each instance, but accumulatively, it is an eternity. 

The ability of the stand to balance makes it easy to load and unload it. The base of the stand is very wide. It has some offset rear legs that give it additional stability and support.

Finally, we must also mention that the legs on this stand also fold away. They have a quick-release lever that allows the legs to collapse under the stand. This minimises the size of the tool when transporting it.


  • It is a very stable stand.
  • The saw can easily be dismounted and transferred to a table.
  • It is very easy to move from one place to another.
  • Extra brackets are available to purchase.
  • It is just as easy to fold away.


  • They do not accept returns
  • The replacement parts are very expensive.

DEWALT DW7880 Scroll-Saw Stand 

Check Price on Amazon

If you are using a scroll saw, your needs might be slightly different from those of other saws. Not to worry. We have found just the table saw for you. The DW7880 is a sturdy, yet lightweight stand. Its entire body is made out of metal. This makes it very strong. It is capable of taking on all Dewalt scroll saws with ease. 

The legs on this stand can be adjusted in height. This allows you the option of working at a height that you are comfortable with. When mounted, the Dewalt DW7880 stand for scroll saw is 32 1/2 inches in height. That is a reasonable working height for most people. It also folds away quite easily which is handy when you are transporting it. For such a simple design it does an incredible job.


  • It is very easy to assemble.
  • The design is simple but efficient.
  • It is quite a sturdy stand.


  • Quality control can be a letdown.
  • Assembly instructions are poor.

Buyer’s Guide

Why do I need a table saw stand?

Many table saws already come equipped with stands, but it is not all. This does not give one saw an edge over the other. If it does not come with a stand like most portable stands do not have stands, then you will need to be on the hunt for a good stand. The stand will allow you to place your saw at a height that is comfortable for you and also avoids you putting it on a table not made for this.

The danger in using a regular table to place your saw on can come in that it may not be made to handle the weight of your saw and may not facilitate the blade as you work. A regular table may also be cumbersome to work around. Remember there will b a lot of activity as you work, that could shake the stand about if it is not sturdy. A good stand will help you with this.

Do the dimensions of my saw matter when I pick out a stand?

The first thing you will need to take into consideration is the weight and dimensions of your saw. Make sure that the stand you get is capable of holding up your saw. If you bought your saw from the shop you should have a manual that has all these, if not, you can go online and see what the manufacturer’s website says about the measurements.

When you buy your saw, you may also get recommendations for a compatible stand. You need to make sure the stand is compatible and can hold up the saw securely.  Always check to see that it is made of durable material. Most saws are pretty heavy and you need a stand that will hold up under all the weight. 

Can I get a portable saw stand?

Since most saws that need stands are portable, it only follows that the stand you get needs to also be easy enough to move around. Foldable legs are a great way to get this feature and enjoy the best of both worlds. You can get a stand with legs that fold, for easy storage and also for you to be able to move it around easier. You can fir a folded stand in the trunk of your car easier than one with protruding legs. 

How tall should a table saw stand be?

When it comes to the height, there is no such thing as one size fits all. If it is off by an inch or two, it can make a world of difference. The standard height of 34″ matches most table saw heights, allowing the workbench to double as an outfeed support. A lot of hand-tool woodworkers, though, prefer a bench 1 or 2 inches lower, allowing more leverage for hand-plane and chisel use.

If you’re mainly a power-tool woodworker, adding a couple of inches might make power-sanding and assembly operations more comfortable. Make your workbench height the distance from the floor to your first thumb knuckle, with your arms hanging relaxed at your sides. This should give you the height you need.

Final Thoughts

Table saws do not always come with table stands. You will need to know what type of work you will most likely be doing and this will help you understand what sort of stand you will need. We certainly hope that of the stands we have reviewed, you find your best fit. Happy shopping!

David D. Hughes
Latest posts by David D. Hughes (see all)

Leave a Reply

Your email address will not be published. Required fields are marked *