Flexcut KN300 Whittler’s Kit
Considering the Flexcut KN300 Whittler’s Kit? Regardless of why you have decided to take up whittling, it is important that you have the right tools at your disposal. They say a poor workman blames his tools. But in all fairness, if your tools leave a lot to be desired, coming up with a product that is properly carved will be nothing short of a miracle.
If you will be carving out any shapes out of wood and you want the wood slivers shaved off properly, to give you the desired finished product, then you will need to make sure that you have the best whittling tools. This entails finding knives with the blade to do the job.
The KN300 whittling kit comes with two knives, a detail knife, and a mini detail knife. This is not all that is in the kit. When you get this, you also get a polishing compound, to keep your blades sharp and always ready for use.
Flex cut makes great whittling knives. And they look great too. Like the other KN series knives, this set has the same well finished wooden looking finish. The handle has an ergonomic design that reduces fatigue on your hands as you work. there are two knives in the kit, the KN13, and the KN27.
The KN27 is a mini detail knife. Its blade bevel is much smaller and measures 3/4″. It is a straight blade. The blade on this knife is very fine and ultra-thin. This is done so that there is no disturbance of the wood close to what you are carving. This is especially important when you are carving very fine details.
The handle on this knife is specially designed for you to be able to hold it in different positions. This will let you carve for longer periods because your hand is comfortable. It also helps you pay greater attention to detail.
Meanwhile, the KN13 has a blade measuring 1 1/2″ and it has a very fine point. It is also a straight blade just like the KN27, but the difference is that it is a longer blade and it has a fine point. This blade can allow for larger stock removal. Which is unique, when comparing to the other knife in the kit.
The blades are extremely sharp and they allow for precision cutting. This is what you want when you are working on a piece of wood. To keep them sharp, the whitling kit comes with a compound to sharpen the blades. The blades are made of high performing carbon steel which is very strong and great at carving your favorite pieces.
They are extremely sharp, but after some time, they do tend to become dull. And this is why you need the sharpening compound that comes with the kit. You can keep your blades sharp by using the compound.
The two blades in this kit are the KN13 and the KN27. The KN13 has a pointy tip and is great for making very narrow cuts. It is also known as the detailing knife, because of its ability to etch out very fine details in different types of wood. The quality blade does this very well.
The KN27, us the second knife in this kit. It is also known as a mini detail knife. The great thing about these blades is that they are easy to use and very effective too.
These knives are extremely sharp. When you open the packet, you do not need to sharpen them first, they are ready and rearing to go. and so it is necessary to watch your fingers when you take them out of the packet. As you work on the wood, make sure that you have a steady grip on the knife.
Some carvers suggest using both hands to steady the knife as you slice through the wood or add the details that will make your piece unique. Also, make sure to hold the knife appropriately as you work.
The great thing about these blades is that they are fixed in place which means there is less chance of getting hurt by folding blades such as are found in utility knives.
These knives can not be sold to people under the ag f 18 and this serves as a precautionary measure to keep the blades out of the hands of inexperienced users. You can also make use of thumb guards and gloves to protect your hands as you work. Make sure to always take the necessary measures and avoid accidents.
Who is this product ideal for?
This kit is perfect for woodcarvers of any skill level. whether you do your carving for fun or you are a professional and you have a couple of orders that you need to fill out, this whittling kit will be perfect for you. The knives are easy to use regardless of your skill level. Either way, it is necessary to be cautious when using these blades or any other.
- They are easy to use
- They are precise
- They are sharp
- The kit comes with a sharpening compound, so you don’t have to go out looking for another
- If you are used to using knives with blades that fold back in, this one may take a little getting used to.
You can transform a block of wood into an intricate design by using the right tools. The Flex cut whittling kit, gives you the blades that you need to carve the way that you need. In as much as whittling may be your hobby or your favorite past time, you still want to make sure that the piece that you carve has the detail you want.
A piece of wood can come alive in the right hands and with the right tools. Flex cut makes many different tools meant for carving. The KN 300 whittling kit, has two of some of the best knives made by Flexcut.
These are sure to give you the desired result. They each have a separate advantage and this is what makes it so great to get this kit. Even if you are just starting out, these knives will fit just nicely in your hand. We recommend this kit because of the precision the blades give you and because of how easy they are to use.
Of course, if you prefer to carry one knife then you may need to look for other carving tools from Flex cut that have many blades in the same knife. Happy shopping!
- Beavercraft C12 Review Chip Carving Knife - May 27, 2020
- Beavercraft C11 Review Knife for Geometric Woodcarving - May 26, 2020
- Beavercraft C9 Marking Striking Knife Review - May 26, 2020
Flexcut KN300 Whittler's Kit
Considering the Flexcut KN300 Whittler's Kit? Regardless of why you have decided to take up whittling, it is important that you have the right tools at your disposal. They say a poor workman blames his tools. But in all fairness, if your tools leave a lot to be desired, coming up with a product that is properly carved will be nothing short of a miracle.
Product SKU: KN300
Product Brand: Flexcut
Product Currency: USD
Product Price: 51.95
Product In-Stock: 1