April 26, 2021

Makita 2703 vs 2705 | How These Two Table Saws Compare Side By Side

My friend’s struggle choosing Makita table saws landed me on the Makita 2703 vs 2705 comparison. I tried both models and contributed my experience and research to this discussion. There are features to compare on these products so that you remain with a top pick. These include the blade, motor, and speed. You could also consider the fence system, dust extraction system, and weight. I urge you to match the features with your needs. That is what this article is reviewing.

Overview of the Makita 2703

The Makita 2703 is a 15 Amp benchtop table saw with a 10-inch carbide blade. The speed is 4,600 rotations per minute. The electric brake ensures safe and quick adjustments. There is maximum productivity due to the braking system. The bevel comes with a rack and pinion design. It weighs up to 40 pounds, and the vibration is minimal. 

The Makita 2703 has a large handle that helps you in a quick and accurate depth setting. That gives you comfortable handling when operating the saw machine. It rips times four layers of the material in one cut. The maximum cutting capacity at 90 degrees is 3-9/16inch, and at 45 degrees, it is 2-1/2inch. The fence is easy to use as it stays parallel to the blade. The arbor is short, and it does not accept dado blades. 

The rugged steel stand makes the table saw sturdy. There are pull-out wings that increase the table surface. That makes it versatile as it works on multiple sizes of material. The miter is excellent when it comes to miter cuts. It is ideal for cabinets and bookshelves, and it is lightweight to the extent that you carry it using one hand. The table saw has a Rousseau stand that accepts wide sheets of wood. 

Pros

  • Powerful motor
  • Quick
  • Lightweight
  • Safe
  • Comfortable

Cons

  • Minimal vibration
  • Poor fence system

(See The Alternative)

Key Features of the Makita 2703

Rip fence

It comes with a cam-locking rip fence. It is easy to adjust compared to the double-locking designs. The fence system stays parallel to the blade. The fence system is easy to maintain using the simple twist-handle feature. The design is easy to clean.  Keep checking the fence for accuracy.

Electric brake

The electric brake is a safety feature that ensures you adjust when cutting your material. Adjustments are made possible during the cutting process. The electric blade makes the cuts safe and quick. There is accuracy since you stop when you want to make amendments or check the progress. 

Blade

It has a 10inch carbide blade that is sharp to cut through thick materials. It is adjustable and replaceable. When you run a poor installation, that results in vibration. Whenever you notice breakages or blunt edges, you have to change the blade. That makes the operation smooth and easy. 

Table

The table is of magnesium. It is measured 27 by 22 inches and is spacious for standard material. 

Miter gauge

Miter cuts are a bit fair due to the excellent miter attachment. The miter gauge uses an auxiliary fence board. It uses bolts, and the fasteners have to stay within the face board. 

Angle stops

The angle stops are at both 45 and 90 degrees. The positive angle stops need adjustment and regular checks. You position it using handwheels and a triangular ruler on the table. That is to check the blade if it is 90 or 45 degrees to the table surface. The screws are for adjustment. 

Switch

The switch is on the right side. That is a challenge to right-hand operators. When right-hand operators use the machine, the right hand holds the material, and the left hand controls the switch. It remains a safety feature, and it appears to be for left-hand users. 

Dust collection system

It comes with a dust port that traps all the dust from the back of the saw. The dust saw should stay out of the motor so that it does not compromise the productivity of the table saw. It collects almost 98% of the dust saw. 

Overview of the Makita 2705

What makes it a powerful; table saw is its versatility. Its convenience comes with features that make it easy to use. It comes with a large capacity 15 Amp motor that makes it ideal for professional users. It can make up to 4,000 rotations per minute. The electric brake is efficient and easy to operate. 

At 90 degrees, it runs down to 3-9/16 inches, and when it is operating at 45 degrees, it runs to 2-1/2 inches. The large cutting capacity can rip 4 x 8 sheets of wood at once. It also has the dado blade. The table saw is used by carpenters, furniture makers, and flooring contractors. The extension table gives you a large butting area. The blade guard comes without additional tools. 

The dual side blade guard is adjustable. It becomes easy to measure the length from blade to rip fence when you are cutting. Release the lever for easy riving knife adjustments. It works in three different positions. The design allows you to have a clear view of the blade as it works on the material. It has a 60mm dust port.

Pros

  • Professional use
  • Dust port
  • Efficient
  • Versatile
  • Tool-less blade

Cons

  • Few rotations per minute
  • It is for professionals

(Source)

Key features of the Makita 2704

Rip Capacity

The rip capacity has a sub-table that can accommodate an 8×4 ft sheet. It complements the overall machine. 

10-inch blade

The blade diameter is 260mm. It has a decent size that makes it powerful enough to cut through large piles. The blade has a 40 tooth Tungsten carbide-tipped blade. 

Max cutting depth

The maximum cutting height at 90 degrees is 93mm. When it is at 45 degrees, it runs up to 64mm.

Amp motor

The 1650 Watt motor is powerful. It is a 15Amp motor that completes a heavy load quickly.

Rotations per minute

The 1650 Watt motor makes 4800 rotations per minute. It is powerful enough to increase the speed of the machine. That is why it makes you complete a task in a short period. 

Pinion fence rails

The fence makes the task accurate. The adjustment mechanism that it comes with allows you to have accuracy when cutting. 

Blade angle

The blade can sit at a 90-degree cutting angle and cuts down to 93mm. When it is at 45 degrees, it goes down to 64mm. It is adjustable from -0.5 to 45.5 degrees. 

Similarities

  • They are both versatile products.
  • They are easy to use. 
  • They both come with 15Amp motors.
  • They have fixed speed.
  • Their fence systems come with adjustment settings. 
  • Both products have the maximum cutting capacity of 3-9/16inch at 90 degrees and 2-1/2inch at 45 degrees.

Differences

  • The Makita 2703 has a fixed speed of 4,600 rotations per minute, whereas the Makita 2705 makes 4,800 rotations per minute.
  • The angle on Makita 2703 is adjusted from 0 to 45, whereas the Makita 2705 adjusts the angle from -0.5 to 45.5 degrees.

Cost 

Both products are more affordable as they have an attractive price range. They are both under 600.

Verdict

The prices of both models are under 600. They cost almost the same amount, and the prices change from time to time. It appears like the Makita 2703 is for the left-handed user, whereas the 2705 suits both operators. However, the Makita 2705 has a higher fixed speed than the Makita 2703. Both models are accurate and fast. The difference determines your best pick. Have you seen our Makita 2704 vs 2705 comparison?

David D. Hughes
Latest posts by David D. Hughes (see all)

Leave a Reply

Your email address will not be published. Required fields are marked *